- Inverter welding machine, DC
- Multiprocess: MIG/MAG, MMA and air arc gouging
- MMA welding and gouging possible without wire feeder or remote control
- Gouging with carbon electrode diameters of up to 13mm (505)
- Basic: Twin-knob operation – setting of the welding voltage and wire-feed speed at the wire feed unit
- Protective earth monitoring (PE)
- Connection capability for remote control
|
|
|
Set Taurus 505 Basic Duo Gouging |
|
|
|
MIG/MAG |
|
Setting range for welding current |
|
5 A - 1000 A |
|
Duty cycle at ambient temperature |
|
40 °C |
|
60 % |
|
1000 A |
|
100 % |
|
860 A |
|
Mains frequency |
|
50 Hz / 60 Hz |
|
Mains fuses (slow-blow) |
|
3 x 35 A |
|
Mains voltage (tolerances) |
|
3 x 400 V (-25 % - +20 %) |
|
Dimensions, machine, LxWxH in mm |
|
624 x 298 x 1536 |
|
Weight, machine |
|
ca.126 kg |
|
Protection classification |
|
IP 23 |
|
Insulation class |
|
H |
|
Standards |
|
IEC 60 974-1; -10 / CE / S-Safety sign / EMC class A |
|
|
|
– |
- No electronics in the wire feeder
- Setting of operating point, wire speed and non-latched/latched on the wire feeder
- Twin-knob operation
- Setting of all welding parameters and welding data displays on the welding machine
- Highlights
- MIG/MAG welding with solid and flux cored wire, MMA welding, air arc gouging
